PEK-3x8x16

PetEnclosure Kits / 3x8x16

Sale price Price $ 459.99 Regular price $ 459.99

All photos shown with a Modified Gate Kit. Additional components were used.~

 The SnapFence 3' tall x 8' wide x 16' long Pet Enclosure Kit allows you to create a very clean and useful pet enclosure. This kit can purchased in a frame only so that you may add the wire of your choosing. This kit comes complete with 1 gate access. You can use it on soft surfaces such as grass or dirt, and even use it inside on garage floors or hard surfaces. The staking system allows you to secure it in the ground for an enclosure that will stand up to your pets.

~Snap-Together Assembly Required
48 Feet of fencing included.
 
(shown with 2 gates and optional caps)
PEK-3x8x16 / 3'H x 8'W x 16'L
Frame only kit includes:
(10) 34” post/rails / Part  No. #VFR-34
(22) 46” post/rails  / Part  No. #VFR-46
(12) sturdy stakes (7") / Part No. #SSTK-1
(6) 3-way elbows / Part No. #VFL-4F
(14) tees / Part No. #VFT-3F
(1) gate kit  / Part No. #GK-3
       (not including wire panel)
(4) support brackets / Part No. #VFA-1
(2) bags of screws  / Part No. #VFM-1
(3x12x24 pictured)
PEK-3x8x16L / 3'H x 8'W x 16'L
Frame w/ Lattice Panels kit includes:
(10) 34” post/rails / Part  No. #VFR-34
(22) 46” post/rails  / Part  No. #VFR-46
(12) sturdy stakes (7") / Part No. #SSTK-1
(6) 3-way elbows / Part No. #VFL-4F
(14) tees / Part No. #VFT-3F
(1) gate kit  / Part No. #GK-3
(1) 2-pack gate panel wire / Part No. #VFGP-1
(4) support brackets / Part No. #VFA-1
(11) lattice panels / Part No. #VFLP-1
(5) bags of screws  / Part No. #VFM-1
(3x8x8 pictured)
PEK-3x8x16W / 3'H x 8'W x 16'L
Frame w/ Wire Panels kit includes:
(10) 34” post/rails / Part  No. #VFR-34
(22) 46” post/rails  / Part  No. #VFR-46
(12) sturdy stakes (7") / Part No. #SSTK-1
(6) 3-way elbows / Part No. #VFL-4F
(14) tees / Part No. #VFT-3F
(1) gate kit  / Part No. #GK-3
(1) 2-pack gate panel wire / Part No. #VFGP-1
(4) support brackets / Part No. #VFA-1
(11) wire snap panels / Part No. #VFSP-1
(5) bags of screws  / Part No. #VFM-1
(10) packs of panel clips / Part No. #VFW-1
These parts lists makes 3' tall by 8’ wide by 16' length of fence maximum
SnapFence Starter Kits are an easy solution to begin your project. Easy to install,
it literally goes up in minutes! Remember that you can add extension kits to make any length project!