Sometimes the wall is not the problem. It is simply too low for the way the yard is used today.
A well-built block, brick, concrete, masonry, or wood wall may still leave a patio, pool, courtyard, side yard, or seating area exposed to nearby sightlines. Replacing that wall can become a much larger project than the homeowner needs. A fence topper for privacy offers a more focused solution: add decorative height and light screening to the suitable wall that is already there.
The SnapFence® Wall Topper is a complete white lattice kit designed for that exact job. It adds approximately 17 inches of decorative height while the open lattice continues to allow light and airflow.
What a Fence Topper Changes - and What It Does Not
A wall topper can soften direct sightlines, create more separation, and give an unfinished wall a cleaner architectural finish. Because the lattice remains open, the yard can feel more private without feeling dark or boxed in.
It is important to choose it for the right purpose. The SnapFence® Wall Topper is an approximately 17-inch wall extension, not a four-foot freestanding fence, pet-containment fence, or security barrier. When a project needs a taller ground-installed fence or enclosure, a SnapFence® four-foot frame system is the better starting point.
Why Framed Lattice Looks More Finished
Loose lattice can look like an afterthought when cut edges, joints, and supports remain exposed. A coordinated frame gives the lattice a defined border and helps the addition look intentional from one section to the next.
SnapFence® is to fencing what white trim is to a home. The clean white frame does not compete with the property; it finishes the edge around the lattice and helps the entire wall look more complete.
What Comes in the 12-Foot Wall Topper Kit
Each complete kit covers approximately 12 linear feet and includes three coordinated four-foot lattice sections, white PVC posts and rails, screws, connectors, and the lattice for this application.
This complete-kit distinction matters. The Wall Topper includes its lattice. SnapFence® Trellis and Hard-Surface systems are frame systems, so their compatible lattice or wire material is selected and purchased separately.
Important installation distinction
Wall anchors and wall-mounting fasteners are not included because the correct fastener depends on the wall material, wall condition, and installation conditions. The Wall Topper is wall-mounted only. It is not freestanding and is not intended for direct ground installation.
Check These Five Things Before Ordering
1. Confirm that the existing wall is a suitable solid structure and is in sound condition.
2. Measure the usable wall-top run, including corners, changes in height, posts, gates, and obstructions.
3. Decide where the additional screening is actually needed instead of automatically covering every wall.
4. Confirm local building, permit, property-line, and HOA requirements before installation.
5. Select anchors or fasteners appropriate for the exact wall material and site conditions.
Privacy by Day. Solar Glow by Night.
The pre-drilled post openings can accept compatible optional solar lights. That lets the same clean white Wall Topper become part of the nighttime landscape around a patio, pool, courtyard, or garden.
Solar lights are not included. Showing that disclosure beside every nighttime image keeps the presentation accurate while still helping homeowners visualize the finished evening look.
A Better Answer When the Wall Is Simply Too Low
A complete rebuild is not always the right answer. When the existing wall is suitable and the goal is added decorative height, light screening, and a more finished appearance, a lattice fence topper can solve the specific problem without taking over the yard.
Wall too low? Ask Otto.
Next Step
SHOP WALL TOPPER
VIEW WALL TOPPER DETAILS
WATCH OTTO / HOW TO