SnapFence® for Contractors & Property Professionals
Show Clients More Options. Build Clean, Repeatable Outdoor Upgrades.
SnapFence® gives contractors, handymen, landscapers, pool professionals, fence repair specialists, and property managers a coordinated family of modular PVC systems for privacy, screening, enclosures, access, wall-top upgrades, garden boundaries, and landscape definition.
Use this page to show clients finished possibilities, compare installation types, choose a lattice look, and move directly to the right SnapFence® product.
Start With the Jobsite. Then Choose the Solution.
The fastest way to guide a client is to begin with where the project will be installed.
EXISTING WALL
Wall Topper
Add approximately 17 inches of decorative height, privacy, and architectural finish to a suitable existing wall.
CONCRETE • PATIO • DECK
Hard-Surface Systems
Create privacy screens, dividers, equipment screens, enclosures, or gated access on a suitable stable surface.
SOIL • GARDEN • YARD
No-Dig Trellis Fence
Create a clean frame for lattice, hardware cloth, or wire mesh without traditional post-hole digging or concrete.
BEDS • PATHS • LOW BORDERS
Landscape Products
Define planting beds, walkways, lawns, and landscape areas with coordinated white-lattice products.
Hard-Surface Privacy & Enclosure Systems
The contractor workhorse for concrete, patios, decks, masonry, wood, composite decking, and other suitable stable surfaces.
Use the SnapFence® modular surface-mount frame to create privacy screens, patio or deck dividers, trash and recycling enclosures, pool and HVAC equipment screening, pet areas, and service-access layouts where in-ground installation is not needed or practical.
Choose a no-gate system for continuous runs or a with-gate system where walk-through or service access is required. Additional no-gate sections can extend the surrounding layout.
You buy the frame. You choose the panel. Build it your way.
Pool or HVAC equipment enclosure with service access
Hard-Surface equipment screen in a landscaped setting
Patio privacy screen or outdoor-room divider
Coordinated hard-surface enclosure with gate
One White Frame. Many Finished Looks.
The clean white SnapFence® frame gives the project structure and a finished architectural border. The client chooses a compatible lattice color, pattern, openness, and privacy level to fit the home, deck, patio, landscape, or managed property.
SnapFence® provides the frame and, when selected, coordinated gate components. Compatible lattice is selected and purchased separately. Anchors and hard-surface fasteners are not included because the correct fastener depends on the mounting surface and site conditions.
Wall Topper: More Privacy Without Rebuilding the Wall
Transform the wall the client already has with approximately 17 inches of decorative height, light screening, privacy, curb appeal, and a finished architectural look.
The SnapFence® Wall Topper is designed for suitable existing block, brick, concrete, masonry, wood, and other solid wall structures. Unlike the Hard-Surface and Trellis frame systems, the Wall Topper is a complete kit and includes its white lattice.
Show Clients theFinished Look—Day and Night
Finished Wall Topper adds decorative height and screening
Optional lighting creates nighttime ambience — lights not included
Finished Wall Topper around a pool and outdoor living area
Lifestyle result: more privacy while the yard remains open and bright
Wall anchors and mounting fasteners are sold separately. Choose the correct fastener for the wall material and site conditions. Optional solar lights are not included.
SNAP. DRILL.FASTEN. SLIDE. FINISH.
A simple visual installation story helps contractors explain the system without turning this page into a full instruction manual.
SNAP — Assemble the connector pieces
DRILL — Prepare the mounting location
FASTEN — Use the correct fastener for the wall material
SLIDE — Install the lattice into the assembled frame
FINISH — Present the completed Wall Topper
More SnapFence® Solutions for the Property
After the primary privacy, enclosure, or Wall Topper project is selected, use these coordinated products to complete the landscape and create a consistent white-lattice look across the property.
No-Dig Trellis Fence
A clean frame for compatible lattice, hardware cloth, or wire mesh in suitable soil. Available with or without coordinated gate access.
Landscape Edging
Low-profile landscape definition for beds, pathways, lawns, and garden areas. Optional solar lights are not included.
Garden Border Fence
A 17-inch-high decorative boundary for flower beds, walkways, lawns, and landscape accents. Optional solar lights are not included.
Why SnapFence®Works for Repeat Contractor Projects
One coordinated product family can help contractors present more solutions without making every project look the same.
START WITH THE SURFACE
Choose Wall Topper, Hard-Surface, Trellis, or a lower landscape product based on where the project will be installed.
SHOW CLIENTS OPTIONS
The white frame creates a consistent architectural border while compatible lattice choices change color, pattern, openness, and privacy.
BUILD IN MODULES
Create straight runs, corners, screens, enclosures, and gated access using coordinated sections selected for the project.
FINISH MORE OF THE PROPERTY
Combine privacy, screening, wall-top, garden, and landscape products for a coordinated property-wide result.
Have a Project in Mind? Show Us the Jobsite.
Send SnapFence® clear project photographs and a few basic details. We can help identify which product system should be reviewed for the project.
• Approximate project length and desired height
• Installation surface: existing wall, concrete, patio, deck, masonry, wood, composite, or soil
• Whether a gate or service-access opening is needed
• Preferred lattice color, pattern, and privacy level